This is the mid-size four-cylinder range of the Blait second-generation semi-hermetic reciprocating refrigeration compressor line, covering eight models from YBF4VCS-6.2Z to YBF4NCS-20.2G with nominal motor power from 6 to 20 HP and displacement from 34.73 to 56.25 m3/h at 50 Hz.
All models are four-cylinder machines on a common 42 mm stroke with four bore steps of 55, 60, 65 and 70 mm, giving displacements of 34.73, 41.33, 48.50 and 56.25 m3/h so one plant layout can be filled at different duty sizes.
The oil suffix sets the refrigerant: R is the mineral-oil build for R22 and R502, and E is the POE ester-oil build for R404A plant. Both refrigerant groups, R22 and R404A/R507A, are standard builds with complete capacity data behind them. The Z suffix denotes the medium-low temperature version with a type-2 motor; G denotes the medium-high temperature version with a type-1 motor.
Every model uses a PW part-winding start motor on 380 to 420 V three phase 50 Hz, with a 440 to 480 V 60 Hz build available. Maximum working current is 14 to 37 A, starting current 39 to 97 A and locked-rotor current 68 to 158 A.
Lubrication is by splash with a 2.6 litre oil charge and a 120 W crankcase heater. Weight including oil is 127 to 142 kg. Suction ports are 28, 35 or 42 mm and discharge ports are 22 or 28 mm.
Ratings are stated at 20 K suction superheat with no liquid subcooling, at 30, 40 and 50 degrees Celsius condensing and evaporating temperatures from plus 7.5 down to minus 45 degrees Celsius depending on model. Typical duty is commercial refrigeration, medium-temperature cold storage, food and beverage processing and pharmaceutical cold chain.
| Availability: | |
|---|---|
| Quantity: | |
YBF4VCS-6.2Z~YBF4NCS-20.2G
Blait
Highlights at a glance




Technical Specifications



About this supplier
Zhejiang Briliant Refrigeration Equipment Co., Ltd. Founded in 2013 in Zhejiang Province, China, Blait specializes in the R&D, production, and sales of refrigeration compressors. Located near National Highway 104 with direct expressway access, our facility ensures efficient nationwide logistics. Factory & Production Our 17,000 m² manufacturing base employs 100+ skilled technicians. Blait operates proprietary precision CNC machining lines for compressor components, delivering exceptional accuracy, efficiency, and quality that establish our competitive edge in the refrigeration industry. Quality & Testing Our performance testing platform complies with GB/T 5773-2004, GB/T 10079-2018, and GB/T 19410-2008 national standards, equipped with imported high-precision instruments calibrated by the National Accredited Metrology Testing Center. Every compressor is fully validated from design through assembly. Certifications National High-Tech Enterprise | Specialized & Sophisticated Enterprise | Zhejiang Province Science & Technology SME | China Institute of Refrigeration Member | Shaoxing Enterprise R&D Center | CRAA Certified | ISO9001 | ISO14001 | ISO45001 OEM / ODM Full customization available: displacement, voltage, frequency, refrigerant compatibility, and mounting configurations. From single units to bulk orders - Blait delivers tailored solutions. Packing & Shipping Reinforced wooden crates with foam cushioning and moisture-proof film. FCL/LCL sea freight, air freight, and express delivery to 50+ countries worldwide.
Company overview

Factory profile

Customization capabilities

Packaging & shipping specifications

Extended company profile

FAQs
Which one of these is the right compressor for my system?
Send us what you actually run - the low side and high side temperatures, the refrigerant, your electrical supply, and either the room load or the nameplate of the machine you are replacing. We come back with the matching model out of the eight in this range, its cooling capacity at your own duty point, and the starter and cable currents to plan around. You do not need to work it out yourself.
Can it go straight onto my existing R22 system?
Yes, on the mineral-oil version, which is the build made for R22 and R502 duty. If you are building new plant on R404A or R507A, take the ester-oil version instead. Both are ordered as factory builds, so nothing is converted after the fact and your piping, receiver and charge stay where they are.
Will it start on my electrical supply?
Standard build is 380 to 420 V, three phase, 50 Hz, with a part-winding start motor that keeps the surge at switch-on well inside the currents we quote you. A 440 to 480 V, three phase, 60 Hz build is available. Tell us the supply at the site before you order, because the motor is fixed at the factory, not changed on arrival.
Is this a machine my own technician can service?
It is a semi-hermetic unit, so the answer is yes. The cylinder heads come off, there is an oil sight glass you can read without dismantling anything, lubrication is by splash with a 2.6 litre charge, and a crankcase heater is fitted as standard. That means a fault is diagnosed and cleared in your machine room rather than by sending a compressor abroad.
Does it have capacity control or cylinder unloading?
We do not claim an unloading device on these four-cylinder models, and we would rather say that plainly than have you find out later. If part-load running matters to you, send the duty profile - how many hours at full load and how many at part load - and we will confirm with the factory what is genuinely available before you commit.
What pipework and handling should I plan for?
Suction ports are 28, 35 or 42 mm depending on model, with 22 or 28 mm discharge, so your pipe sizing is settled from the model we quote you. The units run 127 to 142 kg with oil and ship in plywood export crates on pallets, so a small hoist and two people is the whole lifting plan.
How do I know the machine that arrives is the one you quoted?
Before the goods leave we photograph the nameplate against your order and send it to you: model code, refrigerant and oil version, supply, and the port sizes. Read it against your drawing. If anything does not line up, we raise it there and then instead of letting it arrive and sit on your floor.